| Crafted from blue, cold-pour Urethane Plastic which closely approximates the original piece. Holes to accept Booster Tube are pre-drilled. Tab notches face upward when inserted into the hull. Raise Captain Tempest's eyebrow to full approval by ordering replacement fins today! |
| Crafted from blue, cold-pour Urethane Plastic which closely approximates the original piece. Holes to accept Booster Tube are pre-drilled. Tab notches face upward when inserted into the hull. |
| This item affixes underneath each Midship Fin. (2 required to complete the toy). Crafted from blue cold-pour Urethane Plastic which closely approximates the original piece. You can't escape from Agent X20 without a pair of these babies. |
| Crafted from blue cold-pour Urethane Plastic which closely approximates the original piece. It's impossible to steer safely through the Ocean Door without a set of Hydroplane fins. Don't make Commander Shore chew you out for scratching the paint on Stingray! Get yours today! |
| Crafted from blue cold-pour Urethane Plastic which closely approximates the original piece. |
| Crafted from silver-grey, cold-pour Urethane Plastic. Pushes into control cabin roof and rotates, just like the original. Perfect for spying on Atlanta while she's sunbathing at the beach. |
 | Replica Parts for:
Lone Star Cap Gun and Stingray model. |
|
| Replica Box. 20w x 14h x 5d (cm). Another rare, vintage Stingray toy box. Recreated from scans of an original which were digitally restored for printing. (All creases, tears and stains retouched to perfection). Comes assembled with die-cut insert tabs on both end flaps. A nice display box to give context for your Stingray Cap Gun. |
| Replica Box. 5w x 13h x 26 l (cm). Recreated from scans of an original box which were digitally restored for printing. The die-cut window is carefully trimmed out, the tricky end flaps are shaped correctly, and the yellow die-cut, folded insert is included as per the original. Lone Star made 2, almost identical models of Stingray. This box is for the floating elastic-band-powered version. Indulge yourself with some classic 1960’s graphics and artwork to complete your Lone Star Stingray. PWOR! |
| Replacement propeller and Mounting Bracket. Molded from scratchbuilt replacement parts, based upon accurate measurements and photographic reference. Prop is cast in silver coloured urethane with metal shaft. Bracket is cast in blue urethane which closely matches the original colour. Supplied assembled with elastic band included. |
| Replica periscope. Cast in silver coloured urethane with interior wire armature. |
 | Replica Parts for:
the 1964 Friction-drive toy. |
|
| Replica Box. 9.5w x 9.5h x 25.5l (cm). One of the rarest vintage Stingray toy boxes. Recreated from scans of an original box which were digitally restored for printing. (All creases, tears and stains retouched to perfection). Indulge yourself with some classic 1960’s graphics and artwork to complete your Lakeside Stingray. |
 | Replica Parts for:
Vinyl Plastic Bath Tub Toy, 1964 |
|
| 27w x 16d x 11h (cm). Recreated from scans of an original box and original AP Films Studio Merchandising Reference Sheet. Source material was digitally restored for printing. The Plaston Stingray is arguably the rarest 1960’s toy representing the super-sub and its fragile packaging is always missing. The replica box comes with a nicely researched and illustrated 8-page booklet detailing the history of the toy and insight as to its rarity. |
| The master part for molding was scratchbuilt & sculpted using reference photos of an original periscope. The prototype part was successfully tested for fit on an original Plaston Stingray toy by the client who commissioned the piece. After confirmation it was an accurate representation, the part was molded for casting in yellow-tinted urethane plastic. |
| The master part for molding was scratchbuilt & sculpted using accurate reference photos, scans, and measurements of an original. The part is cast in yellow-tinted urethane plastic, which approximates the original colour. Includes molded mounting pins and fits perfectly. |
| Cast from a mold using an original part. The Tail Fin assembly is cast in yellow-tinted urethane plastic, which approximates the original colour, and fits perfectly. |
| The master part for molding was scratchbuilt & sculpted using accurate reference photos, scans, and measurements of an original. The part is cast in yellow-tinted urethane plastic, which approximates the original colour. Hollow as per the original and fits perfectly. |
| White text, printed on clear, self-adhesive film. Set of 2. |
