 | Replica parts for the 1964 Friction-drive toy. |
|
| Replica Box. 9.5w x 9.5h x 25.5l (cm). Recreated from scans of an original box which were digitally restored for printing. Comes with 2 corrugated, die-cut inserts as per the original. Indulge yourself with some classic 1960’s graphics and artwork to complete your Fairylite Stingray. |
| Ratemaster. Transparent, red-tinted urethane plastic. This 3-piece replica was molded from a carefully disassembled original Ratemaster (propeller). A very difficult part to faithfully reproduce which is always missing from this extremely fragile toy. Your replica will arrive partially assembled, with only the retaining washer (if needed) requiring a dab of glue to affix. You’re almost ready to accelerate Stingray to Rate-6 in an instant. Detailed, illustrated instructions for attaching the Ratemaster included. |
| Periscope. Molded from an original part and cast in transparent red urethane. Finished with chrome paint to reflect the appearance of the original periscope. This part was easily lost or snapped off from the original toy during play. Our replica pushes in just like the original. |
| Tail Fin – Starboard side. Opaque, metallic grey-tinted urethane plastic which approximates the vintage piece. Molded from an original part. Joining edge is smooth (no insert tab) and requires epoxy glue or similar to fix in place. The aft section of this toy is very fragile and the tail fins were usually the first to break off and go missing. These tail fins are the perfect way to restore your Fairylite Stingray. We endeavor to colourmatch to the best of our ability but recommend that you buy a pair to keep the colour consistent on your model. |
| Tail Fin – Port side. Opaque, metallic grey-tinted urethane plastic which approximates the vintage piece. Molded from an original part. Joining edge is smooth (no insert tab) and requires epoxy glue or similar to fix in place. The aft section of this toy is very fragile and the tail fins were usually the first to break off and go missing. These tail fins are the perfect way to restore your Fairylite Stingray. We endeavor to colourmatch to the best of our ability but recommend that you buy a pair to keep the colour consistent on your model. |
| Midship Fin – Fits both sides. Metallic-grey tinted urethane plastic. Molded from an original part. Replica should slot in place without further effort but may require glue to fix in place. The side fins are usually present on these surviving toys but suffer from play-related chipping. Our replicas are an ideal restoration option. We endeavor to colour-match to the best of our ability but recommend that you buy a pair to keep the colour consistent on your model. |
 | Replica box for:
Sweet Cigarettes (candy sticks) |
|
| Replica Sweet Cigarettes box. This replica is created from a digitally restored box and is printed in vibrant colour on card stock. The box is professionally folded & glued and comes with the inner tray and 5 assorted replica cards. |
 | Replica wrappers for the various 1966/1967 Somportex series of gum cards |
|
| This replica Somportex gum card wrapper is from the vintage, highly sought after colour set, based on Gerry Anderson’s Thunderbirds. It is the smaller UK/USA release. Sourced from an original wrapper and digitally restored before printing on beige, textured stock. |
| This replica Somportex gum card wrapper is from the vintage, highly sought after colour set, based on Gerry Anderson’s Thunderbirds. It is the larger size wrapper issued in the Netherlands. Sourced from an original wrapper and digitally restored before printing. |
 | Replica Parts for:
Vintage 1960's JR21 (J Rosenthal) plastic toys. |
|
| Cast from original parts in blue urethane, colour approximates the original parts. The original fins on most surviving TB1's are fragile, brittle and chipped with age or missing completely. Make Brains proud of you when you restore International Rescue's reconnaissance craft to it's former glory with these replica Tail Fins! 5-minute epoxy glue or SuperGlue Gel required to secure in place. Detailed repair instructions inclusive. |
| Cast from original parts in gray urethane, colour approximates the original parts. The original fins on most surviving TB1's are fragile, brittle and chipped with age or missing completely. Make Brains proud of you when you restore International Rescue's reconnaissance craft to it's former glory with these replica Tail Fins! 5-minute epoxy glue or SuperGlue Gel required to secure in place. Detailed repair instructions inclusive. |
| Hollow-cast in red urethane plastic. An accurate recreation of the piece that is sometimes missing or has suffered the indignity of being chewed. Created from an original part that was carefully removed from the toy for molding. Help Scott pilot Thunderbird 1 today – she’s much more aerodynamic with a replica nose cone… |
| Cast from an original part in warm-grey urethane, colour approximates the original tail fin. Although these expensive battery-powered Thunderbirds toys were well-looked after, they occasionally turn up with a missing tail fin. Here’s your chance to restore a treasured toy. FAB! |
| The ‘Empire Made’ and Spanish ‘Molto’ releases were issued with a Jeep / Landrover Pod Vehicle in 3 colour variations. This replica windscreen can be cast in green, red, or grey to approximate those colours. Please specify the colour in the ‘Comments’ field of your order. |
| Yellow tinted urethane plastic with transparent acrylic (perspex) insert glued in place. An accurate recreation of the piece that is often missing from this toy. Created from an original part that was carefully disassembled. Colour closely reflects the actual item. Can easily be mistaken for an original – It’s that good! Go on, you know you need this. It’s not like Gordon can cut the engines off Fireflash by candlelight… |
| Composed of red urethane and cast from an original part. An accurate copy of a piece that is often missing from this nice representation of Thunderbird 4. Note: There are 2 variations of this toy. One came with the rudder and one without. If there is a small hole just aft of the propeller on your TB4, then you are missing the rudder. If there is no hole, then your version never had one when it was manufactured. Don’t leave Gordon rudderless. Buy one today! |
