|
||||
| This replica Somportex gum card wrapper is from the vintage, highly sought after colour set, based on Gerry Anderson’s Thunderbirds. It is the smaller UK/USA release. Sourced from an original wrapper and digitally restored before printing on beige, textured stock. | ||||
| This replica Somportex gum card wrapper is from the vintage, highly sought after colour set, based on Gerry Anderson’s Thunderbirds. It is the larger size wrapper issued in the Netherlands. Sourced from an original wrapper and digitally restored before printing. | ||||
|
||||
| Cast from original parts in blue urethane, colour approximates the original parts. The original fins on most surviving TB1's are fragile, brittle and chipped with age or missing completely. Make Brains proud of you when you restore International Rescue's reconnaissance craft to it's former glory with these replica Tail Fins! 5-minute epoxy glue or SuperGlue Gel required to secure in place. Detailed repair instructions inclusive. | ||||
| Cast from original parts in gray urethane, colour approximates the original parts. The original fins on most surviving TB1's are fragile, brittle and chipped with age or missing completely. Make Brains proud of you when you restore International Rescue's reconnaissance craft to it's former glory with these replica Tail Fins! 5-minute epoxy glue or SuperGlue Gel required to secure in place. Detailed repair instructions inclusive. | ||||
| Hollow-cast in red urethane plastic. An accurate recreation of the piece that is sometimes missing or has suffered the indignity of being chewed. Created from an original part that was carefully removed from the toy for molding. Help Scott pilot Thunderbird 1 today – she’s much more aerodynamic with a replica nose cone… | ||||
| Cast from an original part in warm-grey urethane, colour approximates the original tail fin. Although these expensive battery-powered Thunderbirds toys were well-looked after, they occasionally turn up with a missing tail fin. Here’s your chance to restore a treasured toy. FAB! | ||||
| The ‘Empire Made’ and Spanish ‘Molto’ releases were issued with a Jeep / Landrover Pod Vehicle in 3 colour variations. This replica windscreen can be cast in green, red, or grey to approximate those colours. Please specify the colour in the ‘Comments’ field of your order. | ||||
| Yellow tinted urethane plastic with transparent acrylic (perspex) insert glued in place. An accurate recreation of the piece that is often missing from this toy. Created from an original part that was carefully disassembled. Colour closely reflects the actual item. Can easily be mistaken for an original – It’s that good! Go on, you know you need this. It’s not like Gordon can cut the engines off Fireflash by candlelight… | ||||
| Composed of red urethane and cast from an original part. An accurate copy of a piece that is often missing from this nice representation of Thunderbird 4. Note: There are 2 variations of this toy. One came with the rudder and one without. If there is a small hole just aft of the propeller on your TB4, then you are missing the rudder. If there is no hole, then your version never had one when it was manufactured. Don’t leave Gordon rudderless. Buy one today! | ||||
| Composed of 2 components. Red and yellow tinted urethane with black paint accent. An accurate copy of a piece that is often missing from this favourite among the JR21 Thunderbirds toys. Molds were made from a pair of original engine ports. The cast replicas fit like a glove and are very close to the original colour. However, we recommend ordering a pair so that they will match each other when displayed on TB4. Price is for one complete Exhaust Port. Don’t leave Gordon stranded with his air running out. Buy a pair today! | ||||
| Urethane plastic over metal rod with chrome painted surface. Sourced from a pair of original antennae. Even though the original toy came with a spare antenna – These are often absent from surviving toys. It’s lonely enough for John in the space monitor without losing satellite TV as well. Order a pair and help the poor guy catch up with the latest episode of ‘Coronation Street’. Price is for a single antenna. | ||||
| Oval tail light which pushes into the rear fender. Cast from an original part in urethane, chrome painted, complete with mounting pins. Embossed cross-hatch detail is present. Often missing from this highly collectible toy. | ||||
| Radiator grill which pushes into the coachwork. Cast from an original part in urethane, chrome painted, complete with mounting pins. Save poor old Parker the embarrassment of calling for roadside assistance with an over-‘eated Rolls. Order today. | ||||
| 8.5w x 7h x 15l (cm) paper mounted and assembled on boxboard stock. Recreated from scans of an original box which were digitally restored for printing. (All creases, tears and stains retouched to perfection). Comes with hand-cut insert as per the original. Indulge yourself with some classic 1960’s graphics and artwork to complete your JR21 TB1. | ||||
| 10w x 7h x 25.5l (cm) paper mounted and assembled on boxboard stock. Recreated from scans of an original box which were digitally restored for printing. (All creases, tears and stains retouched to perfection). Comes with 2 hand-cut inserts as per the original. Really nice front panel artwork. Thankfully, the military jeep-Landrover masquerading as a pod vehicle is not illustrated. | ||||
| 6.5w x 6h x 20.5l (cm) paper mounted and assembled on boxboard stock. Recreated from scans of an original box which were digitally restored for printing. (All creases, tears and stains retouched to perfection). Comes with hand-cut insert as per the original. Beautiful wrap-around artwork adorns this perfect box. | ||||
| Assembled size: 12w x 9h x 23l (cm). Upper sleeve is paper mounted and assembled on boxboard stock. Recreated from scans of an original box which were digitally restored for printing. (All creases, tears and stains retouched to perfection). Lower tray is corrugated board. Comes with 2 hand-cut corrugated inserts as per the original. Looks like it just came off the shelf in 1965. | ||||
| Assembled size: 20w x 13h x 25.5l (cm). Upper sleeve is paper mounted and assembled on boxboard stock. Recreated from scans of an original box which were digitally restored for printing. (All creases, tears and stains retouched to perfection). Lower tray is corrugated board. Comes with 2 corrugated inserts as per the original. At least JR21 were honest with the artwork that accurately shows the rather inaccurate toy within. It’s still a beautiful painting, representative of 1960’s merchandising graphics. | ||||
Copyright © 1996-2015 GoGoMag.com. All Rights Reserved.